| Models | CHX-700 | CHX-850 | CHX-1000 |
| TABLE | |||
| Table Width (mm) | 700 | 850 | 1000 |
| Table Length (mm) | upto 10 meter | ||
| Travel ranges (X mm) | upto 10 meter | ||
| Travel ranges (Y mm) | 800 | 1000 | 1200 |
| Travel ranges (Z mm) | 700 | 850 | 1000 |
| T-slot (W x D x N mm) | 18 x 125 x 5 | ||
| BUILT-IN SPINDLE | |||
| Spindle Taper | HSKA63 | HSKA100 | |
| Bearing Inner Diameter (mm) | Ø70 | ||
| Spindle Center to Column (mm) | 780 | 850 | 1000 |
| Spindle Speed (rpm) | 15000 | ||
| Draw Bar Force (kgf) | 1800 ± 100 | ||
| Main Motor (con/30min kw) | 19 / 23 | ||
| SWING HEAD | |||
| Driver Type | Direct drive | ||
| Tilting Range (deg)f) | ± 120° | ||
| Max. Speed (rpm) | 50 | ||
| Min. Unit | 0.001 | ||
| Clamp Torque (Nm) | 2950 | ||
| Working Torge (Nm) | 689 | ||
| AXIS SERVOMOTORS | |||
| Rapid Feed Rate (X/Y/Z m/min)e | 40 / 40 / 40 | ||
| Feed Rate (X/Y/Z m/min) | 10 | ||
| Rated Torque (X/Y/Z m/Nm) | 18.1 / 18.1 / 18.1 | ||
| B-Axis Rated Torque (Nm) | 689 | ||
| C-Axis Rated Torque (Nm) | 533 | ||
| TOOL MAGAZINE | |||
| ATC Type | PLATE | ||
| CAM Type | DUAL ARM | ||
| Tool Selection (Bi-direction) | RANDOM | ||
| Tool Storage Capacity (pcs) | 30(40/60) | ||
| Max. Tool Diameter (mm) | Ø75 | ||
| Max. Tool Length | 250 | ||
| Max. Tool Weight | 8 | ||
| ACCURACY | |||
| Positioning XYZ linear axis (mm) | 0.005 | ||
| BC rotary (sec) | 10″/10″ | ||
| Repeatability XYZ linear axis (mm) | 0.003 | ||
| BC rotary (sec) | 6″/6″ | ||
| MISCELLANEOUS | |||
| Air Requirement (kg/cm2) | 6 | ||
| Voltage | 380 | ||
| Power Requirement (KVA) | 40 | ||
| Coolant Tank Capacity (L) | 450 | ||